MFA CAT 2025

Efectiva: 5 de junio de 2020 (1)

CATÁLOGO: FREIJE.BIZ

Pág. 2

40 - TUBERIA IMC - UL APPROVED, MÉXICO

MFA Code

Descripción

Bundle Weight

Feet Per Lift / Bundle

40 I 0051

Intermediate Metal Conduit IMC - ½”

2,170

100’/3,500’

40 I 0076

Intermediate Metal Conduit IMC - ¾”

2,100

50’/2,500’

40 I 0101

Intermediate Metal Conduit IMC - 1”

2,023

50’/1,700’

40 I 0126

Intermediate Metal Conduit IMC - 1¼”

2,133

10’/1,350’

40 I 0151

Intermediate Metal Conduit IMC - 1½”

2,134

10’/1,100’

40 I 0201

Intermediate Metal Conduit IMC - 2”

2,048

10’/800’

Specifications:

1- Tube: Tube is of mild steel circular in cross section, of uniform wall thickness, surfiviently accurate to cut clean true threads. 2- Compliance: Intermediate Metal Conduit complies with the requirements of Underwriter's Laboratories standard UL 1242 and Fed Spec WW-C-581E. 3- Galvanizing: Prior to electro-galvanizing, all scale, rust dirt and other foreign matter if thoroughly removed from inside and outside of tubing. The zinc coating is such that it will not show a fixed deposit of copper after four, one minute immersions in a standard copper sulphate. 4- Finish: A bichromate finish is applied to the outside of each length of conduit after galvanizing. 5- Fittings: Each length of conduit has a coupling on one end and a thread protector on the other. 6- Threads: Lengths of conduit are threaded on both ends. End are chamfered to remove burns and sharp edges. Pipe and coupling threads are zinc coated .